How to connect Epson L3150 printer to WiFi – Step by Step Process in 2023

Share on Social Media

The Epson L3150 printer with WiFi capabilities is a cost-effective option for your business and a smart answer to all of your printing needs. If properly utilized, it can be a cost-effective product. Below are instructions for you if you want to learn how to connect Epson L3150 printer to WiFi.

You will find both wifi and wifi direct in this type of Epson printer, both of which will be quite helpful for your wireless technology and printing through your printer.

Table of Contents

How to connect Epson L3150 printer to WiFi

Back to the subject, whatever sort of printer you own, the setup will be similar. If you want to buy the best printer under 200$ then this article is for you. You can also connect wifi with the best printer for sublimation.

Connect Epson L3150 to Wifi with LCD screen

If your printer has a screen, you can finish the setup process by following the steps below:
  • Use the Left or Right arrow keys to get to the Wi-Fi setup option.
  • You must then select the WPS or push button to finish the process.
  • In order to find your Epson L3150 printer, press the WPS button while roaming.
  • In order to find your Epson L3150 printer, press the WPS button while roaming.
  • To finish the setup procedure, enter the password when asked and click OK.

How to connect Epson L3150 printer to WiFi

Connect Epson L3150 to WiFi Without LCD screen

The setup procedure will be different if your printer doesn’t have an LCD screen. Follow the mentioned steps below.

  • Press and hold the printer’s wifi button for 3 seconds to start the procedure. Instead, you can hold down the button until the wifi light starts to flash.
  • Your router will now start looking for devices to connect to once you’ve pressed and turned on the WPS function.
  • The printer’s Wifi light will keep flashing even after the wifi connection is complete.
  • Both the light, i.e., on the printer and the router, will be illuminated when the entire setup process is finished.


Using these simple procedures, you can set up the Epson L3150 wifi settings and print wirelessly.

FAQS – Frequently asked questions

1. How do I set my Epson L3150 printer to my Wi-fi?

1. When the security light on the wireless router starts to flash, press and hold the [WPS] button.
2. Press the printer’s [Wi-Fi] button until the light and the light start to flash in succession (approximately 5 seconds).
3. Await the procedure’s conclusion.

2. Without WPS, how can I connect my Epson L3150 to WiFi?

1. Start your printer.
To enable “Wi-Fi Direct” mode (Simple AccessPoint), press and hold the WiFi+Info buttons simultaneously. 2. 2. Alternatively, refer to your handbook for instructions on how to enable Direct mode (Printer as AP) and do so by holding the Info button down for around 7 seconds to print the information/status page.

3. Why my Epson L3150 did not connect to wifi?

You may usually try rebooting the router before connecting the printer to it. If the router or access point has security enabled, confirm this and identify the level of security it employs by using any passwords, keys, or passphrases that may be necessary for connection.

Final Verdict

You may now learn quickly how to connect the Epson L3150 printer to Wi-Fi. If you’re looking for more, read How to Connect an Epson Printer to WiFi. make contact with The Greek Cart. You can also read how to install Epson printer.┬áIf you have any questions comment below we will reply as soon as possible.

Similar Posts